thewolfman

New Member

Total Posts: 1

Member Since:
August 2010

August 21, 2010, 03:05 PM

I just built my own hair laser helmet and was sad that only half of the lasers lit up. I really wasn’t mad or anything because I new it must have been a problem with the soldering and sure enough it was. In the future I will solder more connecting points as it makes things more easy to repair in case of sloppy soldering yet again.

Anywho, I was glad that I finally did my helmet as I put the parts in the closet for the last 3 years from getting bored with the whole thing, and figured medicine will take care of my hair loosing problem anyway. Witch it did btw. But when seeing the very thing I always wanted to make and sell just the other day on ebay.com I got mad and decided to go through with my own intentions and make my own hair laser helmet. It really wasn’t anything to it for the exception of having to solder the damn thing all over again.

I bought a soldering bath on ebay today to make things easier with future soldering due to very tiny cables fitted on every laser. I hope that helps..

Tritium

Member

Total Posts: 41

Member Since:
June 2010

[ # 1 ]

August 21, 2010, 06:53 PM

Wirenuts my friend! Banish that soldering iron to your toolbox. Checkout the instructions for making a Laser Messiah on OMG’s own website at http://www.overmachogrande.com/ and you’ll see what I mean. I got a bunch off ebay quite cheaply.
Cheers

Tritium